Date: 10/20/2001 10:51:35 PM (GMT-7)
IP Address: 22.214.171.124
In Reply to: Re: oh good posted by Ben
the holes (4 on opposite sides, 8 total, about 3/4" deep each) start on the outside edge of the base and go down toward the central contact area. The idea is for the arctic silver (lower thermal resistance than aluminum) to pick up the heat and more quickly spread it along the base of the heatsink.
|[ View FollowUps | Post Followup | E-Mail Sender | Main ]|
Post a Followup