Date: 5/19/2001 12:31:00 AM (GMT-7)
IP Address: 220.127.116.11
I have a Duron 750 on an Epox 8kta2 board and I was wondering if any one could tell me how to get above 800MHz with it. Right now I am o/c just the bus speed and can get to about 825 with some problems and right around 800 stable. I know you can get 900 out of the cpu but I havent had much luck. I tried to o/c using the FSB and the multiplier but had alot of lock ups or locks after post. I have a rather large heatsink and fan that runs around 5000 rpms. I dont know if its heat or if I am not setting the voltage high enough. Any help would be appreciated.
|[ View FollowUps | Post Followup | Main ]|
Post a Followup