Cel2 600 @ 1000MHz
Ups ] [ Post
Followup ] [ CPU-Central Message Board ] [ Home ]
Subject: Cel2 600 @ 1000MHz
Date: 1/5/2001 4:00:43 AM (GMT-7)
IP Address: 126.96.36.199
In Reply to: Help Overclocking a Celeron or P3 posted by
I currently have my Cel2 600 running at 1GHz (1.8V instead of 1.7). Using the thermal pad on the HS too (havent got round to slapping some grease on it yet). I got the Cel2 from a UK company with a confirmed 900MHz O\C but it goes way beyond that, currently running 111x9 but it posts as 1000MHz not 999MHz.
It's on a BE6-2 with a GlobalWin FOP38. The only thing is that you need to connect the fan to header 2 or 3 on the motherboard so that the fan constantly runs at full speed. The other problem is that you must take the grill off the fan (easy) and it blocks one of the ram banks.
IBM GXP75 30 Gig (running on HighPoint 66 controller)
Diamond Viper 770 (190/160) with old 486 fan
Modular Technology 56K modem
Gemeric NIC (unconnected at the moment)
2 sticks of 100Mhz 64meg CAS2 ram (1 Hyundai and 1 Compaq)
2 Case fans.
Not 100% stable (on some games) but that might be the Viper, the ram or the CPU - If anyone has any ideas can they let me know.
FollowUps | Post
Maximum of 100 messages displayed.
Post a Followup
Ups ] [ Post
Followup ] [ CPU-Central Message Board ]