|
Subject: 3 Boot
Name:
clickjocky
Date: 5/5/2008 7:31:47 AM (GMT-7)
IP Address: 75.139.175.39
Message:
Hello everyone. I have an issue were my computer starts up (first time) and It doesn't post. I push the reset button and it boot up into the bios wanting to go into safe mode complaining about memory/cpu timings. I reset it again and it usually boots up like normal. Sometimes it boots up just fine and other times it boots up normal on the second time.
I have all settings set to stock speed. I recently replaced one of my memory sticks. It was causing my computer not to boot..long continuous beep. It booted fine without the bad stick in. It was replaced and seemed to work fine until recently.
Lurker since 98-99 
Raptors in raid 0
8800 gtx
Processor 1 (ID = 0)
Number of cores 2
Number of threads 2 (max 2)
Name Intel Core 2 Duo E6600
Codename Conroe
Specification Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Package Socket 775 LGA (platform ID = 0h)
CPUID 6.F.6
Extended CPUID 6.F
Core Stepping B2
Technology 65 nm
Core Speed 2399.7 MHz (9.0 x 266.6 MHz)
Rated Bus speed 1066.5 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
max VID 1.213V
Northbridge NVIDIA 680i SLI SPP rev. A2
Southbridge NVIDIA 680i SLI MCP rev. A2
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 2048 MBytes
Memory Frequency 400.0 MHz (2:3)
CAS# 5.0
RAS# to CAS# 4
RAS# Precharge 4
Cycle Time (tRAS) 12
Bank Cycle Time (tRC) 24
Command Rate 2T
DIMM #1
General
Memory type DDR2
Manufacturer (ID) Crucial Technology (7F7F7F7F7F9BFFFF)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number
Serial number 8A6B25AE
Attributes
Number of banks 2
Data width 64 bits
Correction None
EPP yes (2 profiles)
Timings table
Frequency (MHz) 333 400
CAS# 4.0 5.0
RAS# to CAS# delay 5 5
RAS# Precharge 5 5
TRAS 15 18
TRC 20 23
EPP profile 1 (full)
Voltage level 2.200 V
Address Command Rate 2T
Cycle time 2.500 ns (400.0 MHz)
tCL 4.0 clocks
tRCD 4 clocks (10.00 ns)
tRP 4 clocks (10.00 ns)
tRAS 12 clocks (30.00 ns)
tRC 24 clocks (60.00 ns)
tWR 6 clocks (15.00 ns)
EPP profile 2 (full)
Voltage level 2.200 V
Address Command Rate 2T
Cycle time 2.000 ns (500.0 MHz)
tCL 5.0 clocks
tRCD 5 clocks (10.00 ns)
tRP 5 clocks (10.00 ns)
tRAS 15 clocks (30.00 ns)
tRC 30 clocks (60.00 ns)
tWR 8 clocks (15.00 ns)
|