Subject: some things you stumble onto
Name:
baldy Date: 12/6/2006 12:13:05 PM (GMT-7)
IP Address: 67.188.164.109 In Reply to: the chiller is amazing posted by
baldy Message:
damn if the dfi boards don't mess with you, i followed the instructions for the chiller plug in, but the temps fluctuated alot.
turns out the cpu temp is detected below onboard fan controller most of the time (25*c), causing the fan on the chiller to turn on and off on a repeated basis, not good i figure...... i could do one of two things, either adjust the temps offset in the bios (nah, would always be subtracting or adding), or, yes, as always, plugged directly to a 12v 4 mollex to 3 min pin.
net result, house is 60*f right now, cpu is 60*f/15*c right now. idles an additional 3/4*c lower now, top temps under stress, about the same 37*, abviously, when the cpu reached that temps the bios allowed full on with the fannage..........
still running the 9x344..........
b
|