Re: KT266a question


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ] [ Home ]

Subject: Re: KT266a question
Name: Bob
Date: 9/15/2006 5:26:47 AM (GMT-7)
IP Address: 68.43.168.23
In Reply to: Re: KT266a question posted by Cristi
Message:

If I understand your question right you want to add DDR RAM, you can use two 256 MB, 512 MB or 1 gig moduals 200 or 266 MHz, you should be able to use faster DDR RAM only it will slow down to what your MoBo can handle. You only have to make sure you can set the RAM voltage to the proper setting.

If you meant can you run DDR & SDRAM at the same time on page 15 of the online manual I put the link below states you can not do this. Also to change from SDRAM to DDR RAM you have to change some jumpers settings on the MoBo, speed & voltage settings. This is old tech & its not plug & play like nowdays.
Bob

[ View FollowUps | Post Followup | E-Mail Sender | Main ]
KT266a FDSX MoBo manual



Follow Ups:



Maximum of 100 messages displayed.

Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:
Upload some images for this post


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ]