Subject: More AMD 939 tricks...................
Name:
baldy Date: 3/2/2006 3:34:03 PM (GMT-7)
IP Address: 67.188.164.109 Message:
for more vcore......
you can wire the CPU to a different default voltage, then when you bump it in the bios it goes even higher, for the daring.....
http://www.ocinside.de/index_e.html
yes, this can be used in conjunction with the original AsRock vcore mod, but, as warned at the website, make sure to set your bios back to stock on the core, then play from there.
I am running 1.50/155 through the CPU as it stands, the temps are around 31*/32*c w/Big Typhoon,
so upping the default on the cpu to 1.5 with wire trick will allow one to get to 1.6 with additional bios adjustment, just for an example......
seems simple enough, although i prefer to make a small horsehoe from ultra thin wire and stick it in the proper Ziff socket holes, i would be kinda worried that the edge of the wire just might touch the base of the neigboring pin under pressure............
i assume no responsibility should you fry your CPU trying to get 3 gig stable............
over and out........
baldy
|