Re: Please....Problem with Lacie 1TB Hard Disk RAID Card...burnt out tranny...
Ups ] [ Post
Followup ] [ CPU-Central Message Board ] [ Home ]
Subject: Re: Please....Problem with Lacie 1TB Hard Disk RAID Card...burnt out tranny...
Date: 2/20/2006 6:23:30 AM (GMT-7)
IP Address: 188.8.131.52
In Reply to: Please....Problem with Lacie 1TB Hard Disk RAID Card...burnt out tranny... posted by
Nice catch on the cap. & hope that was all there
I hope you have access to a large lighted magnifling glass & small soldering tipped pen. That is a transistor more then likely what you need to do is read the (number = #) off of it & cross reference that # & find something that match's or buy the part. The only way I ever worked on a part that small was with a very fine wire. Getting the # off it sould be easy as if Q11 = Q15 then Q12 should equal Q16. Having multible identicle circuits makes your job easier tracing down stuff. You need a close transistor match as there are exact oppsides & different types of jobs & run (turn on) at different power levels.
I do believe you may have other problems thou, as that one part should not have stopped the other 3 drives from working I believe.
FollowUps | Post
E-Mail Sender |
Maximum of 100 messages displayed.
Post a Followup
Ups ] [ Post
Followup ] [ CPU-Central Message Board ]