Subject: Re: I cant even find the info to read
Name:
baldy Date: 1/17/2006 2:29:55 PM (GMT-7)
IP Address: 67.188.164.109 In Reply to: Re: I cant even find the info to read posted by
LED Message:
Agp is locked.............
Run system Async in bios if clocking.
if you achieve a FSB of 250 lets say, then set the HTT to 4, in this case it 800 in the bios on the north.
(4x250=1000) this should not exceed 2000 theoretical, so if you raise the FSB beyond that, it is advisable to go to 3 on the HTT, which is 600 on the Northbridge in da bios..........., the south you can leave on auto, the only time you need to fool with that is when you start cranking the FSB up to 290+.........
trust me on this, there was a reason the FSB was locked @274 on these boards, when i run higher than that i get reboot stalls, although it will start properly from off........
anyway, confused even more??? it actually is pretty easy once you expand your database a smidgen from the old days, just like another small equation to factor in.......
anyway, there isn't that much in the bios, after another day or two you will have tried everything at least once, prolly a lot more....
good luck,
baldy
baldy
|