Date: 4/26/2003 7:24:15 PM (GMT-7)
IP Address: 126.96.36.199
In Reply to: AMD K6-III posted by want-to-know
will the socket7 motherboard you intend to put the K6-III on provide enough amperage to run this CPU. Your board may have the correct voltage settings required for the K6-III, 2.2v or 2.4v, but the voltage regulator circuits may not be up to the task of providing enough amps. The best article on the subject I've seen was written by Dean Kent over at Realworldtech.
|[ View FollowUps | Post Followup | Main ]|
[No follow-ups for this posting]
Post a Followup