|
Subject: Re: Possibilities
Name:
Scott
Date: 8/19/2002 7:05:52 PM (GMT-7)
IP Address: 67.232.148.34
In Reply to: Possibilities posted by
David
Message:
thank you all for the help.
I have 2 sticks of ram (256mb each). The only markings That look like somthing besides serial numbers on the chips themselves are "LD". System case temperature varys from around 33C/91F to the low 100's F. The highest I have seeen the CPU temp is around 130F, After being used some. The power Supply is a 350Watt "L&C" Brand, And has a Pentium 4 Sticker on it, (Came with the case). CPU Core voltage is 1.744 (Varies slightly). I have most of the settings on default for memory and CPU, (I changed the FSB to 133mhz when I set it up first). First serial Port is enabled, Second disabled. Sound blaster is in the 3rd slot down from AGP, I also have a NIC card in the 5th slot but its not hooked up to anything. I have 6 USB ports, (2 on front of case, enabled but not hooked up). 2 on mainboard and 2 on Daughter card. Onboard Audio and Modem (CNR slot?) are disabled, I use a external 56k modem on Serial port 1. The hard drive is on IDE0 as the master, the CD rom is on IDE1 as master. I also have a floppy drive (1.44mb). This revision of the board does not have RAID, ( Has the pin layout but no IDE ports for it). I have reloaded/formated the HD and OS probably 7-10 times this past weekend (Cleared partitions each time). I don't know if it matters or not, But when I first bought the parts the CPU they gave me had 4 bent pins, I straightend them and installed it, but it would not post. So they exchanged it for another. Thanks again.
Scott
|