Date: 1/31/2002 2:21:05 PM (GMT-7)
IP Address: 220.127.116.11
In Reply to: Question for you hard drive experts posted by BangHead
Try tapping it lightly, right above the spindle, with the head of a screwdriver. Sometimes, when the bearings are getting worn out, after a shut-down the motor will stop between two positions and not be able to muster enough torque for a normal start up. In such a case, tapping it can break it loose.
|[ View FollowUps | Post Followup | E-Mail Sender | Main ]|
Post a Followup