Re: P = V * I


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ] [ Home ]

Subject: Re: P = V * I
Name: Bob
Date: 10/21/2001 3:05:58 AM (GMT-7)
IP Address: 24.4.252.151
In Reply to: P = V * I posted by ludicrous
Message:

I understand that the EMF clamp only works right
on motors drawing current ?.

Since a computer PSU uses so much power themselfs reading amps on the inputs would be ruff no 2 computers would be the same.

The easiest way to me to read amp is 3 meters with
the correct resister on each meter & the meters on the 3.3, 5 & 12 volt & add the #'s together in your head. This mod would add an extra draw on the PSU & maybe defeating the reason for making the changes. Oh ya the PSU wires would have to be cut or pulled from the circuit board & heavy wire added to feed the different meters.

Bob

[ View FollowUps | Post Followup | E-Mail Sender | Main ]



Follow Ups:



Maximum of 100 messages displayed.

Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:
Upload some images for this post


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ]