|
Subject: Re: IBM Aptiva 2193-422 with AMD K6-2/533
Name:
 ludicrous
Date: 8/25/2001 4:59:11 PM (GMT-7)
IP Address: 138.67.58.93
In Reply to: Re: IBM Aptiva 2193-422 with AMD K6-2/533 posted by
~NOP
Message:
The five-jumper layout, matching with your descriptions, usually works out to
All OFF = 2.0V
(1 (2 (3 (4 (5
+0.1 +0.2 +0.4 +0.8 -1.2
Needless to say, you can get any combination from those. 2.5 would be (3) and (1), 2.6 would be (3) and (2), etc.
Like LED said, though, don't go any higher than you have to. Start with the minimum voltage required to get a POST and boot, then see if the machine runs stable. If it doesn't, go up by 0.1V and try again. But don't exceed 2.5-2.6V or thereabouts.
You don't want any more voltage than you NEED because extra voltage causes more power dissipation = more heat produced.
|