|
Subject: running 1116 at 1.85v with a 900
Name:
.fred
Date: 3/24/2001 8:59:40 AM (GMT-7)
IP Address: 24.128.54.56
In Reply to: Biggie posted by
LED
Message:
they are fine.
need a good slocket adapter though.
The ones they sent don't work with PIII even if the box says so.
Can't use the 133 MHz because your video will be too high unless your on PCI.
It is the Shuttle 661 board with all the multipliers and FSB with a couple pins you can solder a jumper to to enable a little higher volts.
lostcircuits mainboard page has the board reviewed by me a couple years ago.
Smile
|