Date: 2/23/2001 6:39:16 AM (GMT-7)
IP Address: 126.96.36.199
In Reply to: So what CPU's does the BH6 support.. posted by Phobos
You could probably use any p3's and celerons, including the newer coppermine cores. All you need for the newer P3's is a socket to slot adapter (no more than 20 bucks). As Kiss says, you also have to make sure that your board supports the right voltages (at least as low as 1.7V). However, I don't think that this is a problem 'cause I have an older Abit BX6 and the voltage goes all the way down to 1.3V. It's running a celeron2 566@850 without any problems.
|[ View FollowUps | Post Followup | E-Mail Sender | Main ]|
[No follow-ups for this posting]
Post a Followup