Date: 2/21/2001 6:21:27 PM (GMT-7)
IP Address: 22.214.171.124
In Reply to: New mboard + cpu dont do much, plz help. posted by MonkeySee
the reason is that the jumpers are set by default to 133 MHz. Check the silk screening on the PCB to make sure that it is set to 100 MHz. I got two of these boards as RMAs and in both cases the jumpers were set to the wrong values despite the fact that the owners swore that they never touched them.
|[ View FollowUps | Post Followup | Main ]|
[No follow-ups for this posting]
Post a Followup