Subject: Re: Speed error control and
Name:
baldy Date: 2/7/2001 6:02:18 AM (GMT-7)
IP Address: 209.179.250.67 In Reply to: Re: help with a bh6 and a p3 667 posted by
Fatal Message:
chassis intrusion detect (or something like that) should both be disabled.
Manually set the CPU speed, put in the 5x and the FSB of 133 (the 5x isn't really necessary as the x is imbedded on the CPU, but do it anyway), set the signal to high and the AGP to 2/3.
It has been a long time since I used a BH6, hopefully you can get her up and running, others will follow.
A lot of this is in the manual.
baldy
|