Subject: Well...new PIII800E doesnt cut the mustard!!!HELP pls
Name:
Celstk855 Date: 2/2/2001 2:29:45 AM (GMT-7)
IP Address: 210.84.108.237 Message:
Supplied Cooler's not too bad...a bit of weight in it but only half the blade area (same RPM) of my ALPHA clone, but I've tried them both without success even at 105/35MHz!!!
Sandra Results are below.
Not much better than my C600@855 and CAS/RAS-2,2,2,
I tried the supplied cooler 'cause the lip on my clone doesnt allow for such a good contact with the processor. I'll have to file it off and try again.
Thermocouple within 10mm of the processor is reading 40 at max testing.
1.75,1.8,1.9Volts dont make a difference and I've cranked the RAM back to 3,3,3
Its a Phillipino job.
It does have some tracks on the back whichI am wondering can be played around with like the TBirds.
Cel
|