Date: 1/8/2001 4:51:46 AM (GMT-7)
IP Address: 126.96.36.199
In Reply to: Problem with my WD at ATA-100....very confusing, need help posted by Ron
Make sure you have the blue connector hooked up to the controller and the black end into the drive. Make sure you have installed drivers for both channels you can check this in device manager. Also make sure you have a 40 pin 80 wire cable dont run the slave into your primary drive use the absolute opposite ends of the cable.
|[ View FollowUps | Post Followup | E-Mail Sender | Main ]|
[No follow-ups for this posting]
Post a Followup