Name: Chuck Date: 12/30/2000 7:21:03 AM (GMT-7) IP Address: 210.231.17.18 In Reply to: PC-100 RAM Won't Work posted by Wes Message:
Cant you just use the clear CMOS jumper on the MOBO.First Do a complete shut down and also turn off the 5V power supply. Jumper off the CMOS and then on again. Finally, power back on. If that does not work check your DIMMs and make sure the cards are seated properly.If that doesent work try inserting one stick at a time.Check if the MOBO has a population order when you do this. |
[ View FollowUps | Post Followup | E-Mail Sender | Main ] |